Lightning Arrestor for GPS
This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.
For the purpose of protecting the indoor equipment and circuitry connected to the LoRa gateway, you need to install an Ethernet Port Surge Protection Device (SPD).
By adopting a high pass filter, this product can effectively suppress the low-frequency interference induced by lightning while letting through the GPS signal with low insertion loss. A transient suppression device (TSD) and a gas discharge tube (GDT) is adopted for the protection of the DC feed circuit
Key Features
Connector Type: N-type male to N-type female
Impedance: 50 Ω
Frequency Range: 1500-1650 MHz
Power Loss: ≤ 0.3 dB
Ingress Protection: IP65
Packaging
Product Weight: Approximately 200g
Product Dimension: 89mm x 30mm
Subscribe to find out all the latest updates.