RA0701 is a wireless communication device that detects the carbon monoxide content in ambient air. RA0701 can detect the concentration of CO in the air.

The device is a wireless communication device that detects soil temperature and moisture content and soil conductivity, and transmits the detected data to other devices through LoRa network. The SX1276 wireless communication method is adopted.

LORA wireless transmitter.Small zero drift, repeatable, fast response, easy to install.

19000 mAh Li-SOCL2 battery NFC enabled IP66 rated Cable Length: 1.5m. EMP500-PP sensor is designed to measure pressure relased by liquid and gas; allowing you to catch potential leaks in tanks or pipes.

The R72616 is equipped with a temperature and humidity sensor that detects and transmits ambient temperature and humidity data. It is a wireless communication method that uses the SX1276 wireless communication module. The R72616 has a PM2.5 sensor that detects the concentration of PM2.5 in the air.

RS485 / analog, GPRS / 4G, NB-IOT / LORA, high density, fast response, 3 in 1 NH3 temperature and humidity detection.

19000 mAh Li-SOCL2 battery NFC enabled
IP66 rated
Cable Length: 5m

EM500-SWL is designed to measure the tank level or open water applications while fully submersed in liquid. It is robust and sealed to prevent corrosion and failure.

Easily and Efficiently Track and Manage Meeting Room Occupancy Status and Bookings

The R718PA5 is a wireless communication device that detects NO2 concentration in ambient air. The main unit communicates with the NO2 sensor via the RS485 connection interface. The collected data will be shown in the other devices such as a third party platform through wireless network compatible with LoRaWAN protocol.

EM500-UDL provides highly accurate distance measurement for a variety of applications in harsh environments like flood monitoring, waster water management, fill level monitoring in grains or fertilizer. The measurement is based on ultrasonic waves transmitted and reflected back from nearby objects.

RA0730Y is equipped with wind speed sensor, wind direction sensor, and temperature and humidity sensor. It can detect and send the data of the wind speed, wind direction, temperature and humidity of the environment.

The Netvox R718PB13 device is a wireless communication device that detects the moisture content of the soil. R718PB13 can detect the moisture content of the soil and transmit the detected data to other devices through the wireless network. R718PB13 uses the SX1276 LoRaWAN wireless communication method. The device is compatible with the LoRaWAN protocol (Class A).

R718PE is a wireless communication device that uses ultrasonic to measure distance.

RA0708 is a device for pH detection in water environment. It can detect and send environmental pH data. to data center. It is a wireless communication method. It adopts SX1276 wireless communication module.

The R718PA22 is a wireless communication device that measures the liquid level with an ultrasonic liquid level sensor. Ultrasonic liquid level sensor installed at the bottom of the container, it may measure water, gasoline, diesel and small, medium, large capacity storage tanks (metal, plastic, glass material).

Netvox R718WB is a LoRaWAN™ device compatible with LoRaWAN™ protocol (class A). When the R718WB sensor detects the leak, it will send an alarm message to the gateway. R718WB carries 1-gang water rope sensor. It uses SX1276 LoRaWAN™ wireless communication module.

R718PA11 is a wireless communication device for detecting the liquid depth. R718PA11 can detect the depth of the liquid in the container.

The R718PA4 is a wireless communication device that detects H2S content in ambient air. R718PA4 detectable air H2S concentration levels. The main unit and H2S sensor are connected with RS485 interface, and the detected data to the other equipment shown via a wireless network which employs compliance Lora (TM) wireless communication protocol standards.

LoRa tester AN-106 based on LoRa module. AN-106 LoRa tester is with LCD screen and connect with gateway via OTA network joining. It can test the UPLINK and DOWNLINK packet loss rate and meanwhile users can get RSSI and SNR of gateway transmission.