R718PE Wireless Bottom-Mounted Ultrasonic Liquid Level Sensor
R718PE is a wireless communication device that uses ultrasonic to measure distance.
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
Overview
R718PE is a wireless communication device that uses ultrasound to detect the distance between the device and the detected object. The medium the device detects is the air, so the detected object can be any liquid or solid that has a flat and horizontal surface, water level for example. The main body and the sensor of R718PE communicates via the UART serial port, and the detected data can be transmitted via LoRa communication.
Features
Adopt SX1276 wireless communication module
2 ER14505 batteries AA SIZE (3.6V / section) in parallel power supply
Main unit protection level IP65/IP67 (optional) Ultrasonic probe protection level IP67
The base is attached with a magnet that can be attached to a ferromagnetic material object
Compatible with LoRaWANTM Class A
Frequency hopping spread spectrum technology
Configuring parameters and reading data via third-party software platforms, and set alarms via SMS text and email (optional)
Applicable to third-party platforms: Actility / ThingPark, TTN, MyDevices / Cayenne
Specifications for R718PE Wireless Bottom-Mounted Ultrasonic Liquid Level Sensor
Frequency band | AS923 or AU915 or EU868 or US915 |
Waterproof | IP67 |
Class | Class A |
Power type | DC12V/1A |
Sleep Power consumption | 20uA |
Rx Sensitivity | -136dBm |
Sensor Measurement Range | 0.25-8m |
TX Power | 16dBm |
Chipset | SX1276 |
Certification | TELEC |
Sensors | Ultrasonic |
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
Introduction
R718PE is a wireless communication device that uses ultrasonic to measure distance. The ultrasonic propagation medium of R718PE ultrasonic sensor is air, so the measured object can be any liquid or solid with a certain flat. The device can be used for liquid level detection, material level detection, etc. The host body and the ultrasonic sensor communicate through the UART serial port and transmit the detected data to other devices through the wireless network for display. It adopts a wireless communication method that conforms to the LoRaTM protocol standard.
Features
Adopt SX1276 wireless communication module
2 ER14505 batteries AA SIZE (3.6V / section) in parallel power supply
Main unit protection level IP65/IP67 (optional) Ultrasonic probe protection level IP67
The base is attached with a magnet that can be attached to a ferromagnetic material object
Compatible with LoRaWANTM Class A
Frequency hopping spread spectrum technology
Configuring parameters and reading data via third-party software platforms, and set alarms via SMS text and email (optional)
Applicable to third-party platforms: Actility / ThingPark, TTN, MyDevices / Cayenne
Electric:
Power supply | 2 ER14505 lithium batteries |
Battery life | Battery life is 2.9 years |
Standby current | 20 uA |
Wake-up current | 6.3mA @3.3V |
Low battery alarm | 3.2V |
RF receiving current | |
RF emission current | 120mA @3 .3 V |
* Electrical characteristics may vary depending on the battery voltage
Frequency:
Frequency range | 863MHz-928MHz 470MHz-510MHz |
Power output | US915 20dbm; |
Receiving sensitivity | -136dBm |
Antenna type | Built-in antenna |
Communication distance | Up to 10 km, the actual transmission distance depends on the real environment. |
Data transfer rate | 0.3kbps to 50kbps |
Modulation system mode | LoRa/FSK (Note: choose one of them) |
Supportable LoRaWAN band | EU863-870, US902-928, AU915-928, KR920-923, AS923, CN470-510 |
Physical:
Size | L:112mm*W:88.19mm*H:32mm |
Body weight | TBD |
Operating temperature range | -15℃ ~ 55℃ |
Operating humidity range | <90% RH (no condense) |
Storage temperature range | -25℃ ~ 70℃ |
ACCESSORIES
Subscribe to find out all the latest updates.