• Showing 38 Product(s)
  • Category : Accessory
5V 3A Power Adapter (Level VI)
SG$ 34.04
5V 3A DC output, 100-240VAC input power supply with 1.7mm (ID) plug, and IEC320-C7/C8 2-pin
connector
24V 1A Power Adapter (Level VI)
SG$ 34.04
100-240V, 2.1mm (ID) plug, IEC320-C7/C8 2-pin for 2211, 2212 LEX, 2304, 3500 REX, 4500 REX
5V 3A Power Adapter
SG$ 34.04
5V 3A DC output, 100-240VAC input power supply with 1.7mm (ID) plug, and IEC320-C7/C8 2-pin
connector
EL Family Mounting Kit
SG$ 34.04
EL/VU family mounting kit set of 4 mounting brackets and stencil (hardware not included; order
1 kit per system)
RAK2287 Pi HAT
SG$ 36.76
RAK2287 Pi HAT is a converter board that makes it possible to connect the RAK2287 LPWAN Concentrator Module in PCIe form factor module to Raspberry Pi.
RAKBox-B2 Enclosure with Solar Panel
SG$ 38.12
RAKBox-B2 Enclosure with Solar Panel is rated IP67 for outdoor Industrial IoT Application matching WisBlock form factor board.
Automatic Screwdriver
SG$ 40.85
Screwdriver for WisBlock
24V 1A Locking Power Adapter (Level VI)
SG$ 40.85
24V 1A, Lvl6, Intnl, 2.0mm (Locking) plug, IEC320-
C7/C8 2-pin for 3022
5V 3A Power Adapter with Earth Ground (Level VI)
SG$ 40.85
5V 3A (GND), Lvl6, Intnl, 1.7mm (ID) plug, IEC320-
C13/C14 3-pin
5V 3A Locking Power Adapter
SG$ 40.85
100-240V, 2.5mm (ID) plug with locking connector,
IEC320-C7/C8 2-pin for 3022
RAK7244C Enclosure
SG$ 44.93
RAK7244C Enclosure
Laird FM2 MOUNTING BRACKET FIBERGLASS
SG$ 48.78
FM2 Antenna Mounting MOUNT,HD,2.5 MAST
Wall Mounting kit
SG$ 56.29
Wall Mount Bracket - Accessory for 450-0190 or 450-0191
RAK7243 Enclosure
SG$ 70.47
RAK7243 Enclosure
Pole Mounting kit for LoRaWAN Gateway
SG$ 85.15
Pole Mount Bracket - Accessory for 450-0190 or 450-0191
Outdoor Gateway Enclosure
SG$ 93.95
This Enclosure is made of Industrial Die-Cast Aluminum and rated NEMA-67, Designed to withstand the toughest environments
Beagle Board series Adapter Board
SG$ 142.96
COM6L to BeagleBoard Adapter
Premium Screwdriver
SG$ 163.39
130mm length and 18mm handle diameter. Operates using a 300mAh battery and an STM32 embedded microprocessor for smart torque control.