Class D Full Bridge DVK

High Speed FET Driver

Half Bridge DVK

High Speed FET Driver with Sync

High-speed FET Driver, 33 MHz DVK

High-speed FET Driver, 33 MHz

Transformer Driver for Isolated Power Supplies, 2 MHz DVK

Transformer Driver for Isolated Power Supplies, 2 MHz

Ag1110 is a low cost, long loop SLIC, in a space-saving single-in-line (SIL) package, requiring very few external components. Suitable for use in high line count applications such as Central Office, PBX, Digital Loop Carrier and Pair Gain Systems.

The Ag5800 is IEEE802.3bt Draft compliant PD module is designed for high power POE applications. Depending on cable length it can output up to 85W when supplied from an IEEE802.3bt PSE. This total solution includes 1.5kV of isolation, PoE signature and an integral DC to DC converter for 12 or 24V output

The Ag5300 series are low cost PoE+ modules, in a Single-In-Line (SIL) package, that can deliver up to 30 Watts of output power. Options for 12V DC (Ag5300) or 24V DC output (Ag5324) are available.

PD Module, Isolated DC-DC converter, IEEE802.3af compliant, 5V, 12V SIL

RAK9003 PoE Pi Hat is an add-on board with Raspberry PI form factor which can be plugged into a Raspberry PI directly.

POE evaluation board for Ag9800

PD Module, High efficiency, Isolated DC-DC converter, IEEE802.3af compliant, 13W@5V, SIL.

PSE Module, High Power, IEEE802.3bt compliant, complements Ag5800, DIL.

PD Module, 30W, IEEE802.3at compliant,12V/24V, DIL

Ag2130 is a low cost single channel PSTN Interface in a SIL package. The module provides many integrated features, including a basic barrier on-chip. It can be used in systems without a ground, or in applications where common mode interference is very high. Ag2130 can also be operated from either +3.3V or a +5V supply.

Ag102/3 is Silvertel’s first battery charger module. Designed to maximise battery lifetimes while reducing power consumption using intelligent charging techniques and our high efficiency DC-DC converter

The Silvertel Ag9000-S series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.