Sentrius™ RS1xx LoRaWAN - 923MHz Ext. RTD Temperature Probe (Smoker) – Singapore

NETVOX Wireless Water Leak Sensor (R313W) is a LoRaWAN device compatible with LoRaWAN protocol (ClassA). When the R313W sensor detects the leak, it will send an alarm message to the gateway. When the sensor detects no leaks, it will send a message that shows no leak to the gateway.

LSN50 is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development.
1 x LSN50 v2 module
1 x External RF antenna

Sentrius™ RS1xx Multi-Sensor - 923MHz Ext. Open/Closed + Integrated Temp/RH – Singapore

The WisNode Track D (RAK7205) LPWAN tracker board is built upon the RAK811. At its core is an STM32L1 microcontroller driving Semtech® SX1276/78 LoRa® chip.

RAK2287 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1302, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.

FW Programming Kit – BL6xx and RM1xx

Tundra Cold Room Temperature Sensor for Cold Chain Environment Monitoring

Sentrius™ 915MHz Concentrator Card

R311CC is equipped with two external reed switches, which can be used for door and window switch state detection. The built-in wireless module can realize wireless alarm and other functions, and is compatible with the LoRaWAN protocol.

The R311CA device has a built-in reed switch sensor, and can be connected to a certain number of reed switches through external expansion. It can be used for door and window switch status detection.

R313CC is equipped with two external reed switches, which can be used for door and window switch state detection. The built-in wireless module can realize wireless alarm and other functions, and is compatible with the LoRaWAN protocol.

R313WA is a device that detects the presence of a seat and is compatible with the LoRaWAN protocol. If there is someone on the seat, R313WA will send a message to the gateway. When detecting the seat is empty, the device will send a message that restoring to normal status to the gateway.

R313CA is connected with two external dry contacts for customers to access the device under test, such as switches, buttons, sensors, relays, reed switches, etc. R313CA can detect the electrical level change of the device under test. At the same time, it can realize wireless alarm and other functions through the built-in wireless module

The NETVOX wireless seat sensor (two way) R311WA is a device that detects the presence of a seat and is compatible with the LoRaWAN protocol. If there is someone on the seat, R311WA will send a message to the gateway. When detecting no one on a sensor seat, it will send an normal status message back to the gateway .

R311G built-in photosensitive sensor, can be used for external ambient light intensity detection.R311G is the environmental illuminance automatic detector and the reporter which can send out the environmental illumination report and is a low-power, long range, wireless sensor that can accurately detect environmental illuminance indoor.

Measuring Range: 30 dBA ~ 120 dBA, 35 dBC ~ 120 dBC
Measurement Unit: SPL Actual, Lea, Lmax
Frequency Weighting: A and C Weighting (Software Switchable)
Time Weighting: Fast Weighting