The RAK7268 WisGate Edge Lite 2 is a full 8-channel indoor gateway, based on the LoRaWAN protocol, with built-in Ethernet connectivity for a straightforward setup.

The Dragino LSPH01 is a LoRaWAN Soil pH Sensor for IoT of Agriculture. It is designed to measure the soil PH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.

LoRaWAN® Device for Respiratory Illness Detection and Management
Body Temperature, Respiration Rate, Chest Expansion, Cough/Sneeze Detection, Body Position, Heart Rate

The R718PQA is a wireless communication device that detects toilet occupancy. The device is equipped with a reed switch sensor for detecting the switch status of the door; a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone is in the toilet. Two detections are established at the same time to determine if the toilet is occupied. Through the wireless network, the detected data is transmitted to other devices for display, which uses the SX1276 wireless communication module.

RB11E is a Wireless Occupancy/Light/Temperature Sensor for Netvox ClassA type devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. It combines occupancy ,temperature, tamper switch and light sensors that suitable for detecting human movement indoors, illuminance and temperature.

Indoor LoRaWAN Gateway, 8 Channels, SN923 MHz, 1 x LoRa Antenna, Ethernet

The R718WA Device is a LoRaWAN™ Device compatible with LoRaWAN™ Protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway. R718wa carries 1 water leak sensor. It uses SX1276 wireless communication module.

R711A is mainly used to detect the temperature of indoor air. It transmits the collected data to other devices for display through the wireless network communication module. The device conforms to the LoRa protocol standard.

R718EB has a built-in tilt angle detection sensor. When the device is tilted (compared with the reference angle), the tilt angle will be reported, and the detected data will be transmitted to other devices through the wireless network for display.

RAK2245 Pi Hat Edition is the largest of the RAK2245 family, however, it offers complete compatibility with the Raspberry Pi 40pin header. Thus it is a perfect solution for a DIY gateway using the Raspberry Pi at its core. This makes for a quick to deploy LoRaWAN® solution with low cost and stable performance.

The Netvox R718MBC LoRaWAN device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). The R718MBC uses sx1276 wireless communication module. The communication is fully compatible with LoRaWAN™ protocol (class A).

R718J can be connected to external dry contact devices, such as various switches, buttons, relays and reed switch outputs. It can detect the closure or disconnection signal of the dry contacts. Based on SX1276 wireless communication module, the wireless communication is compatible with LoRaWAN™ protocol (ClassA).

The Netvox R718A LoRaWAN Sensors is mainly used to measure the temperature and humidity in low temperature environment. The R718A is fully compatible with LoRaWAN protocol (class A), and it collects data and sends it to the gateway through LoRaWAN.

R602A is an intelligent wireless alarm that can communicate with other devices through LoRaWAN wireless network. It has high-power speakers and high-brightness LEDs for sound and light alarms. It uses SX1276 LoRaWAN wireless communication module.

WisGate Developer D0+ is a LoRaWAN® developer gateway with GPS function. It is a device composed of a the RAK2246 Pi HAT LPWAN Concentrator module and Raspberry Pi Zero W.

The Netvox R718MBB LoRaWAN device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. The R718MBB uses SX1276 LoRaWAN wireless communication module. The communication is fully compatible with LoRaWAN™ protocol (class A).

The Netvox R718MBA LoRaWAN device is to detect sudden movement or vibration alert. The communication is fully compatible with LoRaWAN™ protocol (class A).

The Netvox R718AB LoRaWAN Sensors is mainly used to measure the ambient temperature and humidity. The R718AB is fully compatible with LoRaWAN protocol (class A), and it collects data and sends it to the gateway through LoRaWAN.

LoRaWAN® Battery-Powered Radio Transmitter and IP67 , 3 input and two output(60VDC) , RS232/RS422/RS485

With dual ultrasonic beams, the advanced EM310-UDL measures from 3 cm up to 450 cm, thus has ultra-short blind zone.