Netvox R72616A is mainly used to measure PM2.5, ambient temperature and humidity in an indoor environment, communicating over the LoRaWAN™ Protocol (Class A). R72616A carries a PM2.5 sensor that can be used to obtain the concentration of suspended particles per unit volume in the air. R72616A is LoRaWAN™ Certified.

R809A is a Wireless Plug-and-Play Power Outlet with Consumption Monitoring for indoor use. It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276 which can realize wireless remote control. R809A has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control.

R831 is a device used to control the switch and is mainly used for the switch control of the strong electric motor control box.

RA02A is a smart home control alarm device with high reliable LoRaWAN™ wireless communication that detects the concentration of smoke in the air and sends a warning tone. It complies with the LoRaWAN™ Protocol Standard.

RA0701 is a wireless communication device that detects the carbon monoxide content in ambient air. RA0701 can detect the concentration of CO in the air.

RA0708 is a device for pH detection in water environment. It can detect and send environmental pH data. to data center. It is a wireless communication method. It adopts SX1276 wireless communication module.

RA0701 is a wireless communication device that detects the carbon monoxide content in ambient air. RA0701 can detect the concentration of CO in the air.

Netvox RA0715 is designed to monitor temperature, humidity and CO2 for indoor air quality (IAQ) applications based on loRaWAN wireless connectivity. The communication is fully compatible with LoRaWAN™ Protocol (Class A).

Netvox RA0716 is mainly used to measure PM2.5, ambient temperature and humidity in an indoor environment, communicating over the LoRaWAN™ Protocol (Class A). RA0716 carries a PM2.5 sensor that can be used to obtain the concentration of suspended particles per unit volume in the air. RA0716 is LoRaWAN™ Certified.

RA0730Y is equipped with wind speed sensor, wind direction sensor, and temperature and humidity sensor. It can detect and send the data of the wind speed, wind direction, temperature and humidity of the environment.

R718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.

The valve disconnector RA10 is a wireless smart device for home security and automatic irrigation. It uses SX1276 wireless communication. Join RA10 to the gateway and realizes the operation of automatically opening and closing the valve through the instructions of other devices in the network. It can also use the manual switch function.

RAK2245 Pi Hat Edition is the largest of the RAK2245 family, however, it offers complete compatibility with the Raspberry Pi 40pin header. Thus it is a perfect solution for a DIY gateway using the Raspberry Pi at its core. This makes for a quick to deploy LoRaWAN® solution with low cost and stable performance.

5.5V module Radial lead plastic case 2.5F

RAK2287 is an LPWAN Concentrator Module with mini-PCIe form factor based on Semtech SX1302, which enables easy integration into an existing router or other network equipment with LPWAN Gateway capabilities.

RAK3272S Breakout Board is specifically designed to allow easy access to the pins on the board in order to simplify development and testing. The breakout board footprint is based on XBee form factor and its main purpose is to allow the RAK3172 stamp module pins to be transferred to 2.54 mm headers.

The RAK3172 LoRa Module includes a STM32WLE5CC chip, which supports eight (8) spreading factors (SF5 ~ SF12) and signal bandwidth that can be adjusted between 7.8 kHz to 500 kHz. It has Ultra-Low Power Consumption of 1.69 μA in sleep mode, but during the Transmit Mode, it can reach the maximum output power of 22 dBm. As a receiver, it can achieve a sensitivity of -148 dBm.