The R718AD is a wireless communication device for detecting temperature. The temperature sensor probe contacts an object to detect the temperature, and the detected data is transmitted to other devices through a wireless network. The SX1276 wireless communication module is used.

R718B connects an external resistance temperature detector (PT1000) to measures the temperature.

R718C series can be connected according to requirements: Type T thermocouple (R718CT) ; Type K thermocouple (R718CK), and it will display the collected data in the gateway

The R311CA device has a built-in reed switch sensor, and can be connected to a certain number of reed switches through external expansion. It can be used for door and window switch status detection.

R718EB has a built-in tilt angle detection sensor. When the device is tilted (compared with the reference angle), the tilt angle will be reported, and the detected data will be transmitted to other devices through the wireless network for display.

The Netvox R718G LoRaWAN device has a built-in light sensor that can be used for ambient light intensity detection. It uses the SX1276 LoRaWAN wireless communication module. The R718G detects the ambient light intensity value and adds it to the gateway. The collected data is displayed in other devices.

R718J can be connected to external dry contact devices, such as various switches, buttons, relays and reed switch outputs. It can detect the closure or disconnection signal of the dry contacts. Based on SX1276 wireless communication module, the wireless communication is compatible with LoRaWAN™ protocol (ClassA).

The Netvox R718MBA LoRaWAN device is to detect sudden movement or vibration alert. The communication is fully compatible with LoRaWAN™ protocol (class A).

The Netvox R718MBB LoRaWAN device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. The R718MBB uses SX1276 LoRaWAN wireless communication module. The communication is fully compatible with LoRaWAN™ protocol (class A).

The Netvox R718MBC LoRaWAN device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). The R718MBC uses sx1276 wireless communication module. The communication is fully compatible with LoRaWAN™ protocol (class A).

The NETVOX R718N125 LoRaWAN wireless single-phase current detector is used to detect single-phase electrical input current.

The NETVOX R718N163 LoRaWAN wireless single-phase current detector is used to detect single-phase electrical input current.

The Netvox R718N17 LoRaWAN wireless single-phase current detector is used to detect 1-phase electrical input current.

The R718N363 Netvox wireless three-phase current detector is used to detect three-phase electrical input current.

The R718N363 Netvox wireless three-phase current detector is used to detect three-phase electrical input current.

R718PA11 is a wireless communication device for detecting the liquid depth. R718PA11 can detect the depth of the liquid in the container.

The R718PA22 is a wireless communication device that measures the liquid level with an ultrasonic liquid level sensor. Ultrasonic liquid level sensor installed at the bottom of the container, it may measure water, gasoline, diesel and small, medium, large capacity storage tanks (metal, plastic, glass material).

The R718PA4 is a wireless communication device that detects H2S content in ambient air. R718PA4 detectable air H2S concentration levels. The main unit and H2S sensor are connected with RS485 interface, and the detected data to the other equipment shown via a wireless network which employs compliance Lora (TM) wireless communication protocol standards.

The R718PA5 is a wireless communication device that detects NO2 concentration in ambient air. The main unit communicates with the NO2 sensor via the RS485 connection interface. The collected data will be shown in the other devices such as a third party platform through wireless network compatible with LoRaWAN protocol.

The Netvox R718PB13 device is a wireless communication device that detects the moisture content of the soil. R718PB13 can detect the moisture content of the soil and transmit the detected data to other devices through the wireless network. R718PB13 uses the SX1276 LoRaWAN wireless communication method. The device is compatible with the LoRaWAN protocol (Class A).