RAK8213 Pi HAT is designed to work in conjunction with the RAK8213 NB-IoT BG96 module. It works as a converter for the RAK8213 mPCIe module to the 40pin header connector on the Raspberry Pi.

RAK7244C Enclosure

RAK7243 Enclosure

RAK4260 breakout board

RAK2287 Pi HAT is a converter board that makes it possible to connect the RAK2287 LPWAN Concentrator Module in PCIe form factor module to Raspberry Pi.

RAK2247 Pi HAT is a converter board designed to allow the RAK2247 Concentrator module to interface with a Raspberry Pi SBC (Single Board Computer). It maps the 52-pin of mPCIe RAK2247 connector to the 40- pin Raspberry Pi header. With GPS on the HAT.

130mm length and 18mm handle diameter. Operates using a 300mAh battery and an STM32 embedded microprocessor for smart torque control.

Sensor Node Enclosure is a small, light, yet very solid outdoor box. It is rated IP67(NEMA-6)

This Enclosure is made of Industrial Die-Cast Aluminum and rated NEMA-67, Designed to withstand the toughest environments

Screwdriver for WisBlock

comes with an N-type female to RP-SMA male connector on a 2-meter antenna cable

The RAK2013 Pi HAT is a Raspberry Pi 3B+ compatible cellular communication module. It is aimed at providing a Low Power Wide Area Network (LPWAN) connectivity to IoT devices. It has several configuration options of its onboard radio including the Quectel BG96/EG95. Thus it supports the following standards: 4G/LTE, Nb-IoT, CAT-M/CAT1/CAT4 Cellular.

The RAK7200 is a LPWAN Tracker device with a 3.7V rechargeable Li-Ion battery and a GPS modem. It is built around a low-power LoRa® module, which integrates the ultra-low-power STM32L073 micro-controller, the SX1276 LoRa® long-range modem, and the CXD5603GF GPS modem.

The WisNode Track D (RAK7205) LPWAN tracker board is built upon the RAK811. At its core is an STM32L1 microcontroller driving Semtech® SX1276/78 LoRa® chip.

The WIsNode Sense Home (RAK7204) is an LPWAN node that serves as an environmental monitoring station. The high-precision sensors, can measure changes in temperature, humidity, gas pressure, and provide an indoor air quality index.

WisGate Developer D4P (RAK7244P) this version allows for powering the gateway via PoE by adding the RAK9003 Pi HAT to the base configuration (RPi 4 + RAK2245 + RAK9003)

The RAK7248 WisGate Developer D4H RAK7248 is a LoRaWAN® Gateway that consists of Raspberry Pi4, RAK2287 Concentrator, and RAK2287 Pi HAT. RAK2287 includes a GPS module and a heat sink for better performance and thermal heat dissipation management, and its housing is built with an aluminum casing.

5.5V module Radial lead shrink wrap 3.5F

The RAK7243C is a fully-fledged 8 channel LoRaWAN® gateway that is Class A and C compliant. It consists of the following modules: RAK2245, RAK2013, and Raspberry Pi 3B+.