AM300 series is a compact indoor ambience monitoring sensor for measurement of temperature, humidity, light, CO2 concentration, CH2O level, TVOC, barometric pressure, PM2.5, PM10 and motion. The data will be shown on the E-ink screen in real-time, which helps to measure the indoor environment and comfort. AM200 series is widely used for offices, stores, classrooms, hospitals, etc.

LoRa tester AN-106 based on LoRa module. AN-106 LoRa tester is with LCD screen and connect with gateway via OTA network joining. It can test the UPLINK and DOWNLINK packet loss rate and meanwhile users can get RSSI and SNR of gateway transmission.

AN-304C is a wireless infrared alarm. When an intruder passes through the monitoring area and moves dynamically, an alarm signal will be sent to the monitoring platform immediately. Users can perform real-time management with this device. It is suitable for the security of family residential, villa, workshop, market, warehouse, office building and etc.

The ARM® Cortex™ M0+ MCU processes BLE software stacks and user’s application software The Cortex™-M0+ core ensures high efficiency and low power. With RF and modem, this SoC supports BLE 125K/500K/1M/2M bps data rates. ASR5601N-ML is designed to meet various kinds of IoT applications such as the data transmission, the remote controller and the speech recognition. OTP is integrated in order to enhance the system's security

The ASR6501 is a general LoRa Wireless Communication Chipset, with integrated LoRa Radio Transceiver, LoRa Modem and a 32-bit RISC MCU.

The ASR6505 is a general LoRa Wireless Communication Chipset, with integrated LoRa Radio Transceiver, LoRa Modem and an 8-Bit CISC MCU. The MCU uses an advanced STM 8-bit core, with 16MHz operation frequency. The LoRa Radio Transceiver has continuous frequency coverage from 150MHz to 960MHz. The LoRa Modem supports LoRa modulation for LPWAN use cases and (G)FSK modulation for legacy use cases. The LoRa Wireless Communication module designed by ASR6505 provides ultra long range and ultra low power communication for LPWAN application.

The world’s first +3.3V only ringing SLIC. Also available as a +5V version, Ag1170 has a built in DC-DC converter to generate all of the tricky telecom and ringing voltages on board – all from a single +3.3V (or +5V) supply. Ag1170 is available in SIL or DIL formats, ideal for VoiP applications.

The Ag2120 is a self-contained highly integrated PSTN Interface Circuit in a single SIL or DIL module, which complies with RoHS requirements

Ag2130 is a low cost single channel PSTN Interface in a SIL package. The module provides many integrated features, including a basic barrier on-chip. It can be used in systems without a ground, or in applications where common mode interference is very high. Ag2130 can also be operated from either +3.3V or a +5V supply.

The Ag5300 series are low cost PoE+ modules, in a Single-In-Line (SIL) package, that can deliver up to 30 Watts of output power. Options for 12V DC (Ag5300) or 24V DC output (Ag5324) are available.

Eval board for Ag6800 PSE Module,
IEEE802.3bt POE

PSE Module, High Power, IEEE802.3bt compliant, complements Ag5800, DIL.

Boost Converter Module, 20W, Isolated DC-DC converter, IEEE802.3af compliant, 5-15V In, 36/57V Out, SIL.

The Silvertel Ag9000-S series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard.

PD Module, High efficiency, Isolated DC-DC converter, IEEE802.3af compliant, 13W@5V, SIL.

PD Module, Isolated DC-DC converter, Includes Bridge Rect diodes, IEEE802.3af compliant, 5V, 12V or 24V, SIL.

The Ag9700 series of PoE modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power over Ethernet (PoE) standard

POE evaluation board for Ag9800

PD Module, Isolated DC-DC converter, IEEE802.3af compliant, Small Footprint, SMT.

POE evaluation board for Ag9900