3.9 kOhms ±1% 0.333W, 1/3W Chip Resistor 0603 (1608 Metric) Automotive AEC-Q200, Pulse Withstanding Thick Film

Zener Diode 4.7 V 1.5 W ±5% Surface Mount SMA

Resistor, Thick film, SMD 1206, 1.5 Ω, 0.25 W, ±1 %, CRL1206-FW-1R50ELF

Cap Ceramic 22uF 35V X5R 20% SMD 0805 85°C Blister Plastic T/R

Low-power, quad-channel, 2/2, 25-Mbps, default output low digital isolator

Automotive high-voltage (18-V) window voltage detector for overvoltage and undervoltage monitoring

40-V, N channel NexFET™ power MOSFET, single SON 5 mm x 6 mm, 6.6 mOhm

Automotive Dual 1.5-pF, 5.5-V, ±8-kV ESD protection diode with VCC pin for USB 2.0

Buck Switching Regulator IC Positive Adjustable 2.5V 1 Output 350mA 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

Automotive low-noise, 350-mA, 410-kHz transformer driver for isolated power supplies

Power MOSFET, P Channel, 150 V, 37 A, 0.0395 ohm, PowerPAK SO, Surface Mount

urrent Sensor 5A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width)

Sterling-LWB5+ embedded wifi module answers that call for next-gen wireless IoT. Powered by Infineon’s CYW4373E silicon, the Sterling-LWB5+ is purpose-built for IIoT connectivity through a secure, reliable, and robust feature set. It’s IoT from the start: fully certified, easy to integrate, and is the fastest route to the market for IoT.

Icron USB 1.1 Rover 2850 operates over standard solid core Cat 5e UTP cable (the same wiring used in Ethernet). The USB Rover 2850 features ExtremeUSB technology which is ideal for extending USB peripherals. This is a true plug and play solution with no need for any additional software or drivers for either the computer or the target devices.

The product adopts digital interface output with options as RS232/485/TTL. Different address codes can be set, multiple accelerometers can be installed in series for long distance, which is convenient for multi-point measurement and data analysis. Internal FFT processing can directly output the object vibration frequency and speed and displacement, convenient for users to analyze data

ADW300 Wireless Metering Meter is mainly used to metering three phase active energy on low voltage network. According to different requirements, there are many communications functions like RS485 communication, WIFI, NB, 4G, adding the new current sampling mode using external transformer

900MHz ConnexLink 1W RS232 Starter Pack includes 2 units

AI Vision Identification Technology Equipped with Wi-Fi for Web GUI Configuration