R0809A01 Wireless Plug-and-Play Power Outlet with Consumption Monitoring and Power Outage Detection

The valve disconnector RA10 is a wireless smart device for home security and automatic irrigation. It uses SX1276 wireless communication. Join RA10 to the gateway and realizes the operation of automatically opening and closing the valve through the instructions of other devices in the network. It can also use the manual switch function.

R720E is a wireless communication device that detects temperature, humility and TVOC. TVOC refers to all organic gaseous substances in a space, and generally refers to the indoor volatile organic substances. TVOC is also the much serious one of the three types of pollution affecting indoor air quality. R720E can detect the concentration value of TVOC.

The Agriculture Sensor is is the ideal solution to streamline and simplify the collection of key soil and environmental metrics for crops, residential and commercial lawns and gardens and golf courses

R718VA is a device to detect the status of toilet water, hand sanitizer level, presence or absence of tissue. This device is connected with a non-contact capacitive sensor can be mounted to the exterior of the container, without direct contact with the object to be detected, which may detect the current water level of positions mounted, or the presence or absence of liquid soap or toilet paper; the detected data is transmitted to other devices through the wireless network. It uses the SX1276 wireless communication module.

The Netvox R718PC LoRaWAN supports RS485 serial port transparent transmission (RS232 sensor power supply is DC12V), which can send read commands to the sensor supporting RS485 protocol according to the configured cycle time. The information of sensor reply will be directly reported to the gateway and displayed in the interface on the gateway. The R718PC uses SX1276 LoRaWAN wireless communication.

AN-101D is a wireless geomagnetic equipment with radar detecting in high accuracy. Easy to install on the surface of the ground, it is widely used in urban road-side parking space and other application scenarios. It provides accurate detection of the occupied and idle status and transfers the information as digital signals to relevant smart parking systems and management platform.

EM500-PT100 is equipped with a highly accurate PT100 temperature sensor. This platinum resistance temperature detector is used universally to measure extreme temperatures.

The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.

The LPS8 is an open source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi or Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.

The NETVOX R718N163 LoRaWAN wireless single-phase current detector is used to detect single-phase electrical input current.

R809A is a Wireless Plug-and-Play Power Outlet with Consumption Monitoring for indoor use. It can remotely control the output switch and detect the output power. It integrates the LoRa/FSK modulation communication wireless module SX1276 which can realize wireless remote control. R809A has a 10A/230VAC output load capability and is primarily used to measure electrical power consumption and wireless switch control.

LoRaWAN® Solenoid Valve Controller

The R718PQA is a wireless communication device that detects toilet occupancy. The device is equipped with a reed switch sensor for detecting the switch status of the door; a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone is in the toilet. Two detections are established at the same time to determine if the toilet is occupied. Through the wireless network, the detected data is transmitted to other devices for display, which uses the SX1276 wireless communication module.

R718C series can be connected according to requirements: Type T thermocouple (R718CT) ; Type K thermocouple (R718CK), and it will display the collected data in the gateway

Netvox Wireless IR Blaster can be used for IR learning and application. After IR learning, R211 can send the infrared control signal to corresponded electric devices. R211 can receive infrared signal from other infrared device and process predefined action, ex. controlling other LoRa devices.

Multi-interface Platform for Connecting Sensors

R831 is a device used to control the switch and is mainly used for the switch control of the strong electric motor control box.