The Transport Data Logger, or TDL for short, facilitates transparency in the supply chain process. Once attached to the shipment, the TDL measures and records temperature, humidity, tilt, and shock. Data captured by the TDL can be visualized through a mobile application. The limits of each parameter are individually configurable, and any violation is traceable and clearly assignable throughout the entire supply chain.

UC300 series is an IoT controller used for remote control anddataacquisition from diverse devices. It contains multipleI/Ointerfacesincluding analog input, digital input, relay output, serial port, PT100RTD input, which support remote device data transmissionviaLoRaWAN® or 3/4G networks.

LoRaWAN® Device for Respiratory Illness Detection and Management
Body Temperature, Respiration Rate, Chest Expansion, Cough/Sneeze Detection, Body Position, Heart Rate

The R718PQA is a wireless communication device that detects toilet occupancy. The device is equipped with a reed switch sensor for detecting the switch status of the door; a built-in PIR sensor (pyroelectric human body infrared sensor) to detect whether someone is in the toilet. Two detections are established at the same time to determine if the toilet is occupied. Through the wireless network, the detected data is transmitted to other devices for display, which uses the SX1276 wireless communication module.

LT1110 Developer Kit, Pluggable, 3.3V TTL Serial, 200mW, u.FL Jack

RB11E is a Wireless Occupancy/Light/Temperature Sensor for Netvox ClassA type devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. It combines occupancy ,temperature, tamper switch and light sensors that suitable for detecting human movement indoors, illuminance and temperature.

Indoor LoRaWAN Gateway, 8 Channels, SN923 MHz, 1 x LoRa Antenna, Ethernet

Sentrius™ MG100 Micro Gateway, LTE-M & NB1 Modem, BLE, External Antenna, Battery Backup, MVNO SIM

4G Modem RS232/RS485 to 4G with 1WAN &1LAN  Europe version

The R718WA Device is a LoRaWAN™ Device compatible with LoRaWAN™ Protocol (Class A). When the sensor detects the leak, it will send an alarm message to the gateway. R718wa carries 1 water leak sensor. It uses SX1276 wireless communication module.

R711A is mainly used to detect the temperature of indoor air. It transmits the collected data to other devices for display through the wireless network communication module. The device conforms to the LoRa protocol standard.

R718EB has a built-in tilt angle detection sensor. When the device is tilted (compared with the reference angle), the tilt angle will be reported, and the detected data will be transmitted to other devices through the wireless network for display.

RAK2245 Pi Hat Edition is the largest of the RAK2245 family, however, it offers complete compatibility with the Raspberry Pi 40pin header. Thus it is a perfect solution for a DIY gateway using the Raspberry Pi at its core. This makes for a quick to deploy LoRaWAN® solution with low cost and stable performance.

The Netvox R718MBC LoRaWAN device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). The R718MBC uses sx1276 wireless communication module. The communication is fully compatible with LoRaWAN™ protocol (class A).

Europe Version Industrial Routers USR-G806-E/AU: high speed 3G/4G network, flexible VPN solutions and link redundancy can ensure the communication data most stability.

R718J can be connected to external dry contact devices, such as various switches, buttons, relays and reed switch outputs. It can detect the closure or disconnection signal of the dry contacts. Based on SX1276 wireless communication module, the wireless communication is compatible with LoRaWAN™ protocol (ClassA).

The Netvox R718A LoRaWAN Sensors is mainly used to measure the temperature and humidity in low temperature environment. The R718A is fully compatible with LoRaWAN protocol (class A), and it collects data and sends it to the gateway through LoRaWAN.

Easy-to-deploy Access Point suitable for diverse indoor wall-/ceiling-mount scenarios.

R602A is an intelligent wireless alarm that can communicate with other devices through LoRaWAN wireless network. It has high-power speakers and high-brightness LEDs for sound and light alarms. It uses SX1276 LoRaWAN wireless communication module.

WisGate Developer D0+ is a LoRaWAN® developer gateway with GPS function. It is a device composed of a the RAK2246 Pi HAT LPWAN Concentrator module and Raspberry Pi Zero W.